Sectional Garage Doors in Perth: Panels, Profiles and Prices
Hinged panel doors that run up and under the ceiling, in flush, ribbed, timber-look and insulated profiles. Measured, supplied and installed with a Capital motor, prices incl. GST.
- Perth metro, from Gosnells
- Panel profiles and windows
- 5-year motor warranty
- Free site measure
Free measure and quote
Quick Answer
Elite Garage Doors Perth supplies and installs sectional garage doors Perth-wide, measured to your opening and fitted with a Capital motor. A standard sectional door supplied and installed is $3,000–$5,000 incl. GST including removal of the old door; insulated, windowed or oversized doors are quoted in the $5,000–$15,000 range. We also service and repair existing sectional doors, from hinges and rollers to torsion springs and panel replacement.
What a sectional door needs and why Perth homes choose one
A sectional door is made of four or five horizontal panels hinged together. The panels ride on nylon rollers in tracks that run up each side of the opening and then curve back under the ceiling, so the door stores flat overhead instead of winding into a drum. A torsion spring on a shaft above the opening does the lifting, and cables from that shaft run down to bottom brackets on the lowest panel. That layout is why a sectional door seals well at the sides and head, opens with less noise than a curtain in steel guides, and can carry windows, insulation and a wide range of face profiles.
The trade-off is space. A sectional door needs headroom above the opening for the spring shaft and the track curve, and clear ceiling depth for the panels to travel back into. Low-headroom track kits reduce the space above the opening when a beam or a storage platform sits close to the lintel, and side room is needed for the vertical tracks. We measure all of it before quoting. Where the garage genuinely lacks headroom, a roller door is the better answer, and our roller door vs sectional door comparison sets out the difference honestly.
Profiles are where the door earns its place on the front of the house. Flush panels in dark Colorbond colours, timber-look laminates, horizontal ribbing and slatted or louvred faces are the ones most often chosen on newer homes, and windows in the top panel add daylight to a garage used as a workshop. Insulated panels quieten the door and keep a garage under a bedroom cooler in summer. Custom faces built onto a sectional frame are covered on our custom garage doors page.
A sectional door has more moving parts than a roller door, so it rewards servicing: hinges loosen, rollers wear flat, cables fray at the bottom bracket, and the torsion spring loses tension over years of cycles until the door feels heavy and the motor strains. An annual garage door service tightens and lubricates all of that and catches a spring or cable before it lets go; our lubricant guide covers what owners can safely do between visits. Never adjust the torsion spring or bottom brackets yourself; both are under load. We install and service sectional doors across the metro, from Seville Grove to Willetton.
Faults We Repair Most Often
What the Visit Covers
- Site measure of headroom, side room, ceiling depth and the floor
- Profile, colour, window and insulation selection with samples
- Old door, tracks and spring assembly removed and disposed of
- New tracks fixed plumb and level, panels hung on nylon rollers
- Torsion spring wound and balanced to the door's weight
- Capital motor mounted, limits and safety reverse set
- Remotes and wall control programmed, manual release shown
- Side, head and floor seals fitted, price in writing incl. GST
What Happens When You Call
Measure and check
Headroom, side room and ceiling depth are measured and the lintel and fixings checked so the right track kit is quoted.
Choose the door face
Flush, ribbed, timber-look, slatted or insulated panels, with colour samples held against the house.
Door made to size
Panels, tracks and spring are made for the measured opening. We book the install when the door is ready.
Install
Old door out, tracks fixed, panels hung, spring balanced, motor fitted and programmed, seals on.
Test and handover
Balance checked by hand, safety reverse tested under the motor, and the 5-year motor warranty explained.
Guide Prices
Sectional garage door prices in Perth move with size, panel profile, insulation and windows. These figures come from our live price list, include GST, and are fixed after a free site measure.
| Job | Guide price (incl. GST) | Notes |
|---|
Guide figures only, and every price includes GST. What you pay depends on what has failed, the parts needed and the size of the door; the technician confirms the exact price at your door before any work begins, and the quote costs nothing.
Why Perth Homes Call Elite
Measured for headroom
The track kit is chosen from real measurements, so the door clears beams and platforms.
Profiles to choose from
Flush, ribbed, timber-look, slatted, windowed and insulated panels in Colorbond colours.
Balanced, not just hung
The torsion spring is wound to the door's weight so the motor lifts without straining.
Quiet running
Nylon rollers, aligned tracks and correct spring balance keep a sectional door quiet.
Old door removed
Panels, tracks and spring assembly taken away as part of the price.
Warranted
5-year motor and drive warranty on Capital openers, 12 months on our workmanship.
Suburbs We Cover
Technicians head out from Gosnells to every part of the Perth metro, including these suburbs:
Your suburb isn't listed? Ring and check — the whole metro area is covered.
Request QuoteFrequently Asked Questions
A standard sectional door supplied and installed is $3,000–$5,000 incl. GST from our price list, with the old door removed. Insulated panels, windows, timber-look faces or an oversized opening move the quote into the $5,000–$15,000 bracket. The price is fixed after a free site measure.
Often a little, because there are more panels, hinges, rollers and tracks, and because the profile and insulation options add cost. In a standard size and finish both sit in the same $3,000–$5,000 installed range. The bigger difference is space: a sectional door needs headroom and ceiling depth that a roller door does not.
For most Perth homes, $3,000–$5,000 incl. GST covers a standard roller or sectional door installed with a Capital motor and the old door taken away. Custom, insulated, windowed or commercial-size doors run $5,000–$15,000. If the existing door's panels and tracks are sound, a spring, cable or motor repair is a fraction of either figure.
On newer Perth homes it is flush or lightly ribbed panels in dark colours, timber-look laminates that avoid real timber's upkeep, slatted and louvred faces, and insulated panels where the garage sits under living space. Smartphone control of the opener is the other change, which we can add to a Capital motor for $280–$380 incl. GST.
Yes, more than a roller door, because hinges, rollers, cables and the torsion spring all wear with use. An annual service from $140 plus parts, incl. GST, covers balance, spring tension, lubrication, hardware tightening and safety checks, and keeps the Capital motor warranty extended to 7 years with annual servicing.
Usually, if the profile and colour are still made. Replacing a single section is $550–$1,100 incl. GST, against $3,000–$5,000 for a new door. If the panel is one of several with rust or the tracks are bent, we will tell you a new door is the better spend.
Free quote
Get a Price for Sectional Garage Doors Perth in Perth
Fill in the form with what the door is doing and a technician will price the job for you. There's no charge for the quote or the call-out, and every visit is fully insured. Rather talk it through? The phone is answered around the clock.
- 0412 988 733
- 1 Walter Street, Gosnells WA 6110
- Every dayOpen 24 hours
Ask for a Free Quote
Rather ring? 0412 988 73324/7 Emergency
Garage Door Repairs Perth
Door jammed at 11pm? Spring gone on a public holiday? Ring 0412 988 733 whenever it happens, or book a slot online. Technicians cover every Perth suburb.