Roller Doors for Perth Garages, Sheds and Carports
New residential roller doors measured to the opening, supplied in Colorbond colours and installed with a Capital motor if you want it automated. Free quotes, prices incl. GST, old door removed.
- Perth metro, from Gosnells
- Colorbond colour range
- Made to your opening
- 5-year motor warranty
From $3,000 incl. GST
Quick Answer
Elite Garage Doors Perth supplies and installs roller doors Perth-wide for garages, sheds and carport conversions, from our base in Gosnells. A standard residential roller door supplied and installed is $3,000–$5,000 incl. GST, with the old door removed; adding a Capital motor to an existing roller door is $770–$990. We measure the opening free of charge before quoting, and we also repair and service the roller door you already have.
How a roller door works and where it fits
A roller door is a single corrugated steel curtain that winds around a drum above the opening. Inside the drum sits a torsion spring that carries most of the curtain's weight, and the curtain's edges run in vertical guides fixed to each side of the opening. Because the whole door lives in that drum, it needs nothing under the garage ceiling, which is why it remains the default for sheds, carports that have become garages, and homes where the ceiling or a storage loft sits right behind the lintel.
The fit is decided by three measurements: the opening width, the opening height, and the clear wall above the opening for the drum, which grows with the door's height. Side room for the guides and the motor also matters, particularly on a single garage where the door sits close to a wall. We measure all of this on site because a curtain cut too tall will foul the drum and one cut too short leaves a gap at the floor. Colorbond finishes cover the standard roof and fence colours, and heavier-gauge curtains are available for wider openings and exposed sites.
Automating a roller door is straightforward: the motor mounts on the drum axle at one end, so most existing manual doors can take a Capital opener without changing the door. If your current roller door is rusting along the bottom rail, has a curtain that has been pushed out of its guides, or a spring that has lost tension so the door drops or will not stay up, a repair is usually far cheaper than a new door; our roller door repairs page lists those faults and prices. A new door is the right call when the curtain is holed or badly dented, the guides are rusted through, or the door is being widened.
Installation covers removing the old door, fixing new guides plumb to the opening, mounting the drum and curtain, setting the spring tension to the curtain's weight, fitting the motor and setting its limits, and a floor seal. For a step-by-step of that day, see roller door installation. If you are weighing a roller door against a panel door, our roller vs sectional comparison covers headroom, noise, sealing and price. We install across the metro area, including Huntingdale and Southern River near our Gosnells base.
Faults We Repair Most Often
What the Visit Covers
- Free site measure of width, height, drum clearance and side room
- Curtain made to size in your chosen Colorbond colour
- Old roller door and guides removed and taken away
- New guides fixed plumb, drum and curtain mounted
- Spring tension set to the curtain's weight and tested by hand
- Capital motor fitted on the axle with limits set, if automated
- Remotes programmed and the manual release demonstrated
- Floor seal fitted and a written price, incl. GST
What Happens When You Call
Measure and advise
We check the opening, the wall above it and the side room, and confirm a roller door suits before quoting.
Colour and options
Colorbond colour, curtain gauge, manual or Capital motor, and a lock or wall control if you want one.
Door made to size
The curtain and drum are made to the measured opening. We book the install once the door is ready.
Install
Old door out, guides fixed, drum mounted, spring tensioned, motor fitted and programmed, seal fitted.
Test and handover
The door is run by hand and by motor, the stop points checked, and the 5-year motor warranty explained.
Guide Prices
Roller door prices in Perth depend mostly on the opening size and the curtain gauge. The figures below come from our live price list, include GST, and are confirmed after a free site measure.
| Job | Guide price (incl. GST) | Notes |
|---|
Guide figures only, and every price includes GST. What you pay depends on what has failed, the parts needed and the size of the door; the technician confirms the exact price at your door before any work begins, and the quote costs nothing.
Why Perth Homes Call Elite
Measured before quoted
Drum clearance and side room checked on site so the door fits first time.
Colorbond colours
Matched to the roof, gutters or fence rather than a one-colour range.
Sized to the opening
Curtains made to your measurements, not the nearest stock size with packers.
Warranted motor
Capital openers carry a 5-year motor and drive warranty, and our workmanship 12 months.
Old door removed
The existing curtain, drum and guides are taken away as part of the price.
Repair when it is enough
If a spring, guide or lock fix will do, we quote that instead of a new door.
Suburbs We Cover
Technicians head out from Gosnells to every part of the Perth metro, including these suburbs:
Your suburb isn't listed? Ring and check — the whole metro area is covered.
Request QuoteFrequently Asked Questions
A standard residential roller door supplied and installed is $3,000–$5,000 incl. GST from our price list, with the old door removed. Oversized or heavy-gauge doors are quoted in the $5,000–$15,000 bracket. The figure is fixed after a free site measure, and there is no call-out fee.
For a single or double garage in a common size and a standard Colorbond colour, most Perth homes sit inside $3,000–$5,000 incl. GST installed. A Capital motor is included in that quote if you want the door automated, or $770–$990 if added to a roller door you already have.
No. We supply doors made to your measured opening rather than kit doors, and we do not install customer-supplied kits. A kit door still needs its spring tensioned to the curtain's weight and its guides fixed plumb, and getting either wrong is the usual reason a cheap roller door binds, drops or jams within its first year.
Keep to a standard size, a stock Colorbond colour and a manual door if you do not need automation. Before replacing at all, check whether the curtain is sound: a lost-tension spring, worn guides or a broken lock are repairs, not replacements, and cost a fraction of a new door.
Usually, yes. A roller door motor mounts on the drum axle, so as long as the curtain runs freely and the spring is correctly tensioned, a Capital opener can be fitted for $770–$990 incl. GST with remotes. If the door drops or will not stay up, the spring needs attention first; our guide on roller door spring tension explains the symptoms.
A well-fitted roller door is not, but a dry curtain rattling in worn guides is. Most noise comes from the curtain rubbing the guides, a loose drum bracket or an unlubricated axle bearing, all of which are addressed during a service. A sectional door on nylon rollers is quieter still if that matters to a bedroom above the garage.
Free quote
Get a Price for Roller Doors Perth in Perth
Fill in the form with what the door is doing and a technician will price the job for you. There's no charge for the quote or the call-out, and every visit is fully insured. Rather talk it through? The phone is answered around the clock.
- 0412 988 733
- 1 Walter Street, Gosnells WA 6110
- Every dayOpen 24 hours
Ask for a Free Quote
Rather ring? 0412 988 73324/7 Emergency
Garage Door Repairs Perth
Door jammed at 11pm? Spring gone on a public holiday? Ring 0412 988 733 whenever it happens, or book a slot online. Technicians cover every Perth suburb.