Skip to main content
EliteGarage Doors

New Garage Doors in Perth, Measured, Supplied and Installed

Roller, sectional, tilt and custom doors for Perth homes, quoted to your opening with a Capital motor and the old door taken away. Free measure and quote, prices incl. GST.

  • Residential and commercial
  • Colours and profiles
  • Measured on site, free
  • 5-year motor warranty
New sectional garage door installed on a double garage of a Perth home, with a Capital motor fitted

Free measure and quote

Quick Answer

Elite Garage Doors Perth supplies and installs new garage doors Perth-wide: roller doors, sectional doors, tilt doors and custom designs, each measured to your opening and fitted with a Capital motor if you want it automated. A standard door supplied and installed is $3,000–$5,000 incl. GST; commercial and custom doors run $5,000–$15,000. The measure and quote are free, and the old door is removed as part of the job.

Choosing a new garage door for a Perth home

The opening decides more than the brochure does. A roller door needs wall space above the opening for its drum but almost none inside the garage, which suits carport conversions and older homes with a low lintel. A sectional door runs on horizontal tracks under the ceiling, so it needs headroom and a clear run back into the garage, and in return it seals better, runs quieter and offers the widest choice of panel profiles. If you are torn between the two, our roller door vs sectional door comparison sets them side by side.

Material and finish matter in Perth's climate. Most residential doors are Colorbond steel, which handles sun and wind well and comes in the colours used on roofs and gutters. Aluminium suits coastal suburbs where salt air attacks steel edges. Timber-look finishes and slatted or louvred designs give a custom appearance without solid timber's maintenance. Insulated sectional panels are worth considering on a north- or west-facing garage or one under a bedroom; our guide on whether insulated garage doors are worth it works through the trade-offs.

A quote for a new garage door has four parts: the door itself, sized to the opening; the motor, which we supply as a Capital unit with remotes; removal and disposal of the old door and tracks; and any making-good, such as a new lintel, side-room framing or a floor that needs levelling under the seal. Non-standard sizes, heavier gauges, windows and custom profiles move the price above the standard range. We measure on site before quoting because a door ordered from a rough measurement is the most expensive mistake in this trade.

Installation begins with the old door and hardware coming out, then the new tracks or guides are plumbed and fixed, the door is hung and balanced, the motor is mounted with its limits and safety reverse set, and the remotes and wall control are programmed. The Capital motor carries a 5-year warranty on the motor and drive, extendable to 7 years with annual servicing.

Not every tired door needs replacing. If the panels are straight and the tracks sound, a spring, cable or motor repair gives the door years more life at a fraction of the price, and we say so at the measure. We fit new doors across the metro area, from the newer estates in Harrisdale and Piara Waters to older suburbs swapping a rusted roller door for a sectional door or a fresh roller door.

Faults We Repair Most Often

Rusted or rotten door panels
New build or garage conversion needs a door
Manual door, want it automated
Door style clashes with a renovated facade
Non-standard opening size
Old door rattles and lets in weather
Door too damaged to repair safely
Shed or workshop needs a wider door

What the Visit Covers

  • Site measure of the opening, headroom and side room
  • Advice on roller, sectional, tilt or custom for your garage
  • Colour and profile selection matched to roof and trim
  • Old door, tracks and hardware removed and disposed of
  • New door supplied, hung and balanced to its springs
  • Capital motor fitted, limits and safety reverse set
  • Remotes and wall control programmed, manual release demonstrated
  • Weather seals fitted to the floor, sides and head
  • Handover walk-through and a written price, incl. GST

What Happens When You Call

01

Site measure

We measure the opening width and height, headroom, side room and the floor, and check the lintel and wall fixings. No cost, no obligation.

02

Choose door and finish

Roller, sectional, tilt or custom, then profile, colour, windows and insulation, with samples to hold against the house.

03

Written quote

One figure incl. GST covering the door, Capital motor, removal of the old door and any making-good, with the lead time stated.

04

Door manufactured to size

The door is made to the measured opening. We book the install date once it is ready and confirm access on the day.

05

Installation

Old door out, tracks or guides fixed, door hung and balanced, motor mounted and programmed, seals fitted.

06

Test and handover

Safety reverse and force settings checked, remotes handed over, and the 5-year motor warranty explained.

Guide Prices

Every price includes GST and comes from our live price list. The quote is fixed after the site measure; the ranges below show where most Perth homes land before any custom options.

JobGuide price (incl. GST)

Guide figures only, and every price includes GST. What you pay depends on what has failed, the parts needed and the size of the door; the technician confirms the exact price at your door before any work begins, and the quote costs nothing.

Why Perth Homes Call Elite

Measured, not guessed

Every door is quoted from a site measure so it fits the opening the first time.

Every door type

Roller, sectional, tilt, custom and commercial, so the advice is not steered towards one product.

One written price

Door, motor, removal and making-good in a single GST-inclusive figure.

Old door gone

Removal and disposal of the existing door and tracks is part of the job.

Capital motors, warranted

5-year motor and drive warranty, up to 7 years with annual servicing.

Repair when it is smarter

If the door is worth saving, we say so and quote the repair instead.

Suburbs We Cover

Technicians head out from Gosnells to every part of the Perth metro, including these suburbs:

Your suburb isn't listed? Ring and check — the whole metro area is covered.

Request Quote

Frequently Asked Questions

From our price list, a standard roller or sectional door supplied and installed is $3,000–$5,000 incl. GST, with the old door removed. Commercial and custom doors are $5,000–$15,000 depending on size, gauge and finish. The exact figure is fixed after a free site measure.

Free quote

Get a Price for Garage Doors Perth in Perth

Fill in the form with what the door is doing and a technician will price the job for you. There's no charge for the quote or the call-out, and every visit is fully insured. Rather talk it through? The phone is answered around the clock.

  • 0412 988 733
  • 1 Walter Street, Gosnells WA 6110
  • Every dayOpen 24 hours
Fully insured on every visit

Ask for a Free Quote

Rather ring? 0412 988 733
Quotes cost nothing · No call-out fee

24/7 Emergency Garage Door Repairs Perth

Door jammed at 11pm? Spring gone on a public holiday? Ring 0412 988 733 whenever it happens, or book a slot online. Technicians cover every Perth suburb.