Custom Garage Doors Made for Perth Homes
Timber-look, cedar, aluminium slat, louvred and flush designer doors built to your opening and your facade, on a sectional or tilt frame, with a Capital motor sized to the extra weight.
- Perth metro, from Gosnells
- Cladding matched to the house
- Any opening size
- 5-year motor warranty
Designed to your facade
Quick Answer
Custom garage doors in Perth from Elite Garage Doors are built to the exact opening and finished to match the house: cedar or timber-look cladding, aluminium slats, louvres, flush panels or a face that continues the wall cladding across the door. Most are built on a sectional frame, some on a tilt panel. Custom and oversized doors are $5,000–$15,000 incl. GST supplied and installed, quoted after a free site measure and design consultation.
What custom means, and what it changes about the door
A custom garage door is custom in one of three ways: its size, its face or its material. Oversized or angled openings need a door made outside the standard sizes. A custom face means the visible skin is chosen to suit the house rather than picked from a catalogue: horizontal timber-look slats, vertical cedar boards, aluminium battens with shadow gaps, louvres for a ventilated garage, or a flush panel in the same cladding as the wall so the door reads as part of the facade. The material follows: cedar, powder-coated aluminium, timber-look laminate over steel, or Colorbond in an unusual profile.
Almost every custom door is built on a sectional frame, because the panels can carry cladding and still hinge, run on tracks and seal against the jambs; a single tilt panel is the other option where the design wants no horizontal joins. Roller doors are rarely custom beyond colour and size. Cladding adds weight, and weight changes everything behind the face: the torsion spring must be sized to the finished door, the tracks and rollers uprated, and the opener chosen for the load rather than the opening size. We spec the spring and motor from the finished weight, not the frame.
Perth's climate decides the material more than fashion does. West-facing doors take the afternoon sun, so real timber needs oiling and will move; timber-look laminates and aluminium give the same lines with far less upkeep. Near the coast, salt air corrodes exposed steel edges and fixings, so aluminium slats and stainless fixings earn their cost. We talk through aspect and upkeep before drawing anything. You can see finished examples in our gallery, and the two frames the designs are built on are described under sectional garage doors and tilt garage doors.
The process runs measure, design, quote, manufacture, install. At the measure we record the opening, headroom, side room, cladding profile and colour references. The design sets the face, joins, fixings and whether the door needs windows or a pedestrian door. The quote is one GST-inclusive figure for the door, the Capital motor, removal of the old door and any making-good, and it states the lead time, which is longer than for a stock door because the door is made to order. We install custom doors across the metro area, including new homes in Harrisdale and Southern River.
Faults We Repair Most Often
What the Visit Covers
- Site measure and colour or cladding match at the house
- Design of the face, joins and fixings, with samples
- Sectional or tilt frame chosen for the design
- Springs, tracks and rollers sized to the finished weight
- Capital motor rated for the door's load, with remotes
- Old door removed and the opening made good
- Installation, balancing and seal fitting
- One written quote incl. GST, with the lead time stated
What Happens When You Call
Design visit
We look at the facade, the opening and the sun exposure, and talk through faces, materials and upkeep.
Quote
A single GST-inclusive figure for the door, motor, removal and making-good, with the lead time.
Made to order
The frame, cladding and hardware are built for the measured opening and the finished weight.
Install
Old door out, tracks or pivots fixed, door hung and balanced to its springs, motor fitted and set, seals on.
Test and care guide
Balance and safety reverse checked, and you are told how to look after the face material you chose.
Guide Prices
Custom garage door prices in Perth turn on size, cladding material and the hardware needed to carry it. The figures below come from our live price list, include GST, and are fixed after the design visit.
| Job | Guide price (incl. GST) | Notes |
|---|
Guide figures only, and every price includes GST. What you pay depends on what has failed, the parts needed and the size of the door; the technician confirms the exact price at your door before any work begins, and the quote costs nothing.
Why Perth Homes Call Elite
Designed at the house
Faces and colours chosen against the actual cladding and light, not from a screen.
Sectional or tilt
Both frames available, so the design is not forced onto the wrong one.
Specified for weight
Springs, tracks and motor sized to the clad door so it runs quietly for years.
Insured
Fully insured for work on new builds and occupied homes.
Material advice
Straight talk on timber versus laminate versus aluminium for your aspect and upkeep.
One quote, lead time stated
Door, motor, removal and making-good in one figure, with the wait made clear.
Suburbs We Cover
Technicians head out from Gosnells to every part of the Perth metro, including these suburbs:
Your suburb isn't listed? Ring and check — the whole metro area is covered.
Request QuoteFrequently Asked Questions
Custom and oversized doors are $5,000–$15,000 incl. GST supplied and installed, from our price list. Where a door lands in that range depends on size, the cladding material and the springs and motor needed to carry it. A stock frame in a non-standard colour or profile can come in at $3,000–$5,000.
Installation is included in our quoted figures: $3,000–$5,000 incl. GST for a standard door and $5,000–$15,000 for a custom one, both with a Capital motor and removal of the old door. There is no separate fitting charge, and the quote states the lead time for a made-to-order door.
Doors that disappear into the facade: flush panels in the wall cladding, horizontal timber-look or aluminium slats with shadow gaps, and dark matte colours. Louvred faces are being used where the garage doubles as a workshop and needs air. Real timber is being replaced by laminates and aluminium that keep the look with less upkeep.
For upkeep, yes. Cedar looks and smells like nothing else but needs oiling and moves with Perth's heat and dry air, especially on a west-facing wall. Timber-look laminates over steel or aluminium hold their colour with a wash-down. If you want real timber and accept the maintenance, we build it; if not, we show you the laminate that matches.
Yes, and material choice matters more there than anywhere. Aluminium slats or panels, stainless fixings and sealed edges resist salt air far better than exposed steel. Our coastal garage door checklist covers the upkeep that keeps any door sound near the ocean.
Longer than a stock door, because the frame, cladding and hardware are made to order after the design is signed off. The lead time depends on the material and the maker's schedule, so we state it in the quote rather than promise a figure here, and we book the install date once the door is ready.
Free quote
Get a Price for Custom Garage Doors Perth in Perth
Fill in the form with what the door is doing and a technician will price the job for you. There's no charge for the quote or the call-out, and every visit is fully insured. Rather talk it through? The phone is answered around the clock.
- 0412 988 733
- 1 Walter Street, Gosnells WA 6110
- Every dayOpen 24 hours
Ask for a Free Quote
Rather ring? 0412 988 73324/7 Emergency
Garage Door Repairs Perth
Door jammed at 11pm? Spring gone on a public holiday? Ring 0412 988 733 whenever it happens, or book a slot online. Technicians cover every Perth suburb.